Lantern RowLantern RowCordless village lights
The set: 6 lights, remote, and charging tray

The set: 6 lights, remote, and charging tray

These are drawings of the design. We'll replace them with photos of real samples.

Coming fall 2027 · not for sale yet

The Lantern Row Set

Cordless, rechargeable lights for village buildings, with one remote for all of them.

Around $40expected for 6 lights. Sets of 4 and 12 too.

No payment now. Join the waitlist and we'll email once, when sets are ready.

Free to join. No payment. Unsubscribe anytime.

  • Hear first, before it's public
  • Vote on colors and features
  • Help test samples in your own village
  • Designed to fit the hole you already have. The part that goes in is no bigger than the C7 bulb it replaces, held by the same metal spring clip.
  • One remote for the whole village. On/off, dimming, warm white plus 16 colors, candle flicker, and a 6-hour nightly timer.
  • Groups. Pair lights to groups 1, 2, or 3 so buildings can show different colors.
  • Rechargeable. Six lights charge at once on the USB-C tray.
  • Remembers your settings after it's switched off.

Specifications

These are design targets we've sent to manufacturers. We'll post measured numbers from samples, including run time at each brightness.

LightColor LEDs plus a separate 2700K warm-white LED under a frosted cap, so warm white looks like an old bulb, not bluish
Brightness25+ lumens in warm white target
Part that goes insideUp to 1 in (25 mm) wide × 1.6 in (41 mm) long, the size of a C7 bulb
Battery locationIn the body behind the light, outside the building, like the old socket
MountingMetal spring clip; unscrews to leave a flat standing base
RemoteRadio (433 MHz or 2.4 GHz, confirming with suppliers), about 30 ft, no aiming target
Run time per charge20+ hours at 50% warm white; 6+ hours at full target
Charging6-bay tray, one USB-C cable, about 3 hours, stops when full target

Battery and safety

  • Lithium-ion cell with a protection circuit against overcharge, over-discharge, and short circuit.
  • Tested before anything ships: UN38.3 and IEC 62133 battery standards, FCC for the radio, RoHS. We'll post the reports.
  • Runs cool. Our spec keeps the shell under 104°F (40°C) at full brightness, safe for resin and painted pieces.
  • Built to last: we're asking suppliers for 500+ charge cycles. When a light eventually wears out, you can buy a replacement.
  • Planned: 1-year warranty and 30-day returns.

Will it fit?

If your building takes a standard village light cord with a C7 bulb and a spring clip, Lantern Row is designed for the same hole. That's most Department 56, Lemax, and similar ceramic and resin pieces. Some older or smaller pieces use different holes; we'll publish a fit list as we test.

More questions →